DeMag Electric Chain hoist, trolley for dc chain hoist, manulift, bohnert, KY

DeMag Electric Chain Hoist

DeMag Electric Chain Hoist

The DeMag electric chain hoist features a 24v cotactor control with a height adjustable control pendant, elapsed operating time counter and high FEM classification. The electric chain hoist comes standard with two speeds, operating limit switches for upper and lower and is easy to service and operate.

DC-Pro Electric Chain Hoist Powder coating on aluminium housing Duty factor: 60% (40/20), 360 starts/hour 3 motion axes Tandem operation Up to 11,000 lb capacity Two suspension brackets for improved C dimension (for sizes DC 1–10) Contact us to get started on the best hoist for your application.
DCS-Pro Electric Chain Hoist Our DCS-Pro electric chain hoist safely lifts, lowers and positions valuable and sensitive parts in an assembly line. Variable speed Slow speed control Up to 90% higher speeds for smaller loads Up to 5,500 lbs (2,500 kg) load capacity Contact us to get started on the best hoist for your application.
DC-Com Electric Chain Hoist The highly reliable DC-Com electric chain hoist can be integrated into the rails of the KBK modular crane system or on I-beam girders. FEM classification 1Am and 2m 24v contactor control 4,400 lbs (2,000 kg) load capacity Standard 16 ft and 26 ft (5m and 8m) hook path Elapsed operating time counter IP 55 enclosure Contact us to get started on the best hoist for your application.
DCM-Pro Manulift Chain Hoist The DCM-Pro manulift chain hoist allows you to handle loads with only one hand up to 550 lbs. Load hooks, pantograph tongs, clamping and shaft grippers, parallel gripper systems can be changed out quickly 24v contactor control FEM classification from 1Am to 4m Gearbox, brake and slipping clutch are maintenance-free for up to 10 years Contact us to get started on the best hoist for your application.
Trolleys for DC Chain Hoists The RU and CF push travel trolleys can be installed on the I-bean girders or KBK modular crane system. For push or electric the trolleys provide horizontal travel that match the requirements of your operation. U type trolleys for manual travel Negotiate curves down to a minimum radius of 39.4 in Drop stop integrated into the side cheek Compact, state-of-the-art industrial design Four sizes: U 11 up to 2,400 lbs (1,100 kg) U 22 up to 4,800 lbs (2,200 kg) U 34 up to 7,500 lbs (3,.400 kg) RU 56 up to 12,000 lbs (5,600 kg) E type trolleys for low-sway electric travel Smooth starting and braking Low-sway handling Designed for DC-Pro chain hoists Control via DSE 10-C/DSE 10-CS control pendants Click-fit trolleys can be clicked right into position Articulated trolleys with curve radius: 31.5 in loads up to 1,200 lbs Flange widths from 1.06 to 3.58 in Contact us to get started on the best hoist for your application.
DCMS-Pro Manulift The DCMS-Pro manulift chain hoist features variable speed control and one-handed operation for both left and right. 2 lifting speeds Low speed control 24v contractor control Creep lifting speed from 0.50 ft/min Height adjustable control pendant cable Electromagnetic compatibility is rated according to EN 61000-6-2 to 4 IP55 enclosure, control pendants with IP65, enclosure to EN 60529 Contact us to get started on the best hoist for your application.

Need Help?