CM Electric Chain Hoist

CM Lodestar Electric Chain Hoist

Legendary in performance, the Lodestar features quiet operation, high duty cycles and best-in-class safety features. Multiple models available.

The CM Lodestar Electric Chain Hoist are quiet, with high duty cycles many safety features. Modes include: Lodestar 2-ton single-reeved unit Heavy Duty DC Brake 5-Pocket Lift Wheel Chain is zinc plated protects against corrosion Lifetime Warranty Metric Rated, CSA Approved Lodestar VS 1/8 to 3 ton capacity 10 ft. standard lift Magnetek IMPULSE® G+ Mini drive CM HI-Tech^™ Hoist Interface Technology Easy access to the Clutch, Motor, Electrical Control Panel and Brake Assembly Lodestar Classic Up to 7-1/2 tons lifting capacity Increased lifting speeds 3-5 ton lifting capacities, double reeved units Lifting speed of 30 feet per minute maximum H4 heavy-duty Overload protector Lodestar XL 7-1/2 ton lifting capacity 3-5 ton lifting capacities, double reeved units Lifting speed maximum 30 feet per minute Heavy duty H4 10 pocket oblique-lay liftwheel Lodestar Wind Edition Wind turbine for the wind power industry Compact, rugged Lodestar Clean Room Perfect for high humidity, corrosive materials, or sanitary conditions 1/4, 1/2, 1 and 2 ton single and two-speed hoists non-oxidizing grease stainless steel load chain FDA-approved white epoxy powder coat paint NEMA 4 and NEMA 4X control stations Sealed weather-proof construction and gear train 115/230 1-phase (single speed only) and 230/460 3-phase model Contact us to get started on the best hoist for your application.
CM Powerstar Electric Chain Hoist Powerstar H4 heavy duty Made for heavy-duty industrial applications Machined chain pockets 7-1/2 hp motor for various lifting speeds Single or two speed controls Two speed models operate on 3:1 speed ratio True vertical lift Dual braking system Magnetic reversing contactor, operates on 115v by control transformer Standard motor is totally enclosed, ball bearing, 30 minute rated Drop of push button control 4 ft. above hook 2 1/2 ft power cord Up to 600 lineal feet of chain NEMA3R, Lifetime warranty, Made in U.S.A. Series 670 Powerstar H-4 heavy duty Created for heavy-duty industrial applications Liftwheel contains machined chain pockets 7-1/2 hp motor provides a wide range of lifting speeds Single or two speed controls True vertical lift Dual braking system Magnetic reversing contactor operates on 115v by a control transformer NEMA 4 rated Drop of push button control is 4 ft. above hook Designed to be maintained “on the beam.” Up to 600 lineal feet of chain NEMA3R, Lifetime warranty, Made in U.S.A. Compensator Designed for flying decks, tables, load leveling applications for the construction industry 8 through 16 fpm lifting speed NEMA 4X control station Single hoist unit Electro-mechanical geared limit switches for up and down direction.Prevents the hook from being accidently run into the hoist Chain container is manufactured from steel and wire mesh Contact us to get started on the best hoist for your application.
CM ShopStar Electric Chain Hoist CM ShopStar Use the ShopStar at workstations and production lines H4 duty cycles Overload device protector 10 pocket oblique lay liftwheel Epoxy powder coat finish 6-1/2 ft. power cord with 3 prong plug on 115v units NEMA 4 control station 5:1 design factor Steel latch lower hook rotates 360° True vertical lift Precision bearings Lifetime warranty, Made in U.S.A. CM ShopStar VS 250 to 1,100 lb capacity Up to 63 ft./min. 100 to 240 volt single phase, 50 to 60 Hz H4 plus duty cycle 5:1 Design factor NEMA 4 rated Rigid hook Made in the U.S.A, UL listed, lifetime warranty CM ShopStar Wind Edition Offered specifically for the wind power industry Long lifts exceeding 300 feet Contact us to get started on the best hoist for your application.
CM Valustar Electric Chain Hoist CM Valustar Manufactured for general commercial applications Machined, heat treated liftwheel with hardened chain guide 5 ft. power cord length Type AC brake, heavy-duty caliper Rugged NEMA 4, 115v control circuit Regenerative braking system Non-oxidizing grease H3 duty-1 phase; H-4 duty-3 phase One-year warranty, Metric rated, Made in U.S.A. Contact us to get started on the best hoist for your application.

Need Help?